Home / Engineering
We prove the tool before you run the part
Cycle time optimisation and statistical parameters, handed over with every tool — not sold as an extra. Founded 2013, 60+ engineers, one roof in Peenya.
Design, manufacture, prove out
Design & planning. In-house engineers translate the drawing into a tool concept — tolerances, machine interface and expected cycle time — before anything is cut.
Manufacture. PCD and carbide tooling ground to ≤3 µm on diameter, under the same roof as design and QA.
Prove out. Cycle time optimisation and statistical parameters (Cpk) delivered with the tool, not after a support ticket.
Built to the client's drawing
Special heads, faster changeoverOff-the-shelf geometry doesn't always fit the operation. We integrate and modify a wide variety of cutting tools to a client's requirements, building special cutting heads where a complex operation calls for one. Our base clamping systems are compatible with a wide range of tooling machines, so changeover between jobs is faster on the shop floor.
Discuss a non-standard tool
Inside a multi-step tool
A single MPI tool collapses rough bore, semi-finish, chamfer and fine ream into one pass — fewer setups, fewer tolerance stack-ups, shorter cycle time. Every insert position is set and verified on our own gauging systems before the tool leaves the shop floor.
Precision tooling, one roof
Mac Precitec India Private Limited manufactures PCD tools, fine boring tools, ISO tools, tool holding systems and setting fixtures for the automobile, aerospace, defence, medical, power generation and machine-building sectors. Design, planning, PCD manufacturing and quality assurance all sit inside the same 15,000 sq ft facility in Peenya — a drawing becomes a proved-out tool faster here than at a shop that outsources any of those steps. Tooling built in Peenya also ships to export customers in Malaysia, Thailand, the USA and Singapore.
Our vision
Turnkey tooling solutions, priced competitively, backed by service — and built indigenously rather than imported. That was the brief in 2013, and it still is.
Our milestone
Three employees, first workshop in Peenya.
Moved to a larger dedicated facility.
PCD manufacturing facility commissioned.
Moved into our own site in Peenya.
Employees across design, manufacturing and QA.
Our team
Design and manufacturing engineers with three decades of combined experience in the cutting tool industry — tool design and development, tool manufacturing, and tooling application. The tools we build are proved out by the people who designed them, not handed off between departments.
Our infrastructure
Everything is under one 15,000 sq ft roof: manufacturing, design and planning, PCD manufacturing and quality assurance. Nothing is outsourced between buildings, which keeps lead times short and changes cheap.
The shop floor runs CNC turning, CNC milling, CNC wire EDM and CNC grinding centres, with a Zoller tool presetter and Diebold gauges for tool setting and inspection.
- CNC Turning
- CNC Milling
- CNC Wire EDM
- CNC Grinding
- Zoller Tool Presetter
- Diebold Gauges
- BFW
- Makino
- Rane Group
Send us the hardest hole on your drawing
We'll come back with a tool, a cycle time and the statistical parameters to back it. Or come and see the shop floor — visitors are welcome in Peenya; call ahead and an engineer will walk you through it.
Send us a drawing Plan a visit